pro4
LZ sand washer machine

LZ sand washer machine is a kind of wheeled washing equipment and combined with dewatering screen and hydrocyclone, which can clean and separate the dust and powder from sand and gravel. Its new seal-structure and reliable driving device can make sure the effective cleaning and a kind of high efficiency sand washing equipment.

Introduction

LZ sand washer machines are wheel bucket type washing equipment and are mainly used for washing, classifying, dewatering and fines recycling of sand. This machine adopting advanced technology for high efficient sand washing, developed according to practical conditions of sand industries to meet out the IS standard requirements of gradation in the final output sand. Sand washer can widely used in sand and gravel plants, washing plants,buildings site, concrete mixing, coal processing, tailings processing plants, hydropower station, etc.

Working principle

*Washing: The bucket is driven by the motor through the reducer and rotates in circle. There are many sand storage web grooves and bucket screen for sand storage and primary dewatering. When the bucket moves, sand can be put out by sand storage web groove after being cleaned in the cleaning tank and primary dewatered on the bucket screen. *Recycling: Flowing slurry water is extracted by slurry pump, fine sand is collected by the centrifugal force of the cyclone, then fed to the polyurethane screen from the apex spray. The 0.074-3mm fine sand and water are efficiently separated through the vibration screen. *Dewatering: coarse sand (3-10mm) and fine sand (0.074-3mm) are fed onto polyurethane vibrating screen for dewatering.

Salient features
  • 1.Multiple functions: classifying, washing, fines recycling and dewatering.
  • 2.High washing quality, the final mud content down to about 1%.
  • 3.Final water content as low as 12%-15%.
  • 4.More than 95% 0.074-3mm fine sand can be recycled.
  • 5.Good quality sand output to meet out the construction standards.
  • 6.High tech planetary gear reducer is used in all propel sand washers for better and efficient maintenance free running.
  • 7.Large output capacity, comparatively bigger in size.
  • 8.Reasonable heavy structure, very low energy and water consumption, easy installation, long service life.
  • 9.By varying the rpm of the buckets, the percentage of fines can be controlled.
  • 10.Solve cleaning problem of sedimentation tank and improve economic performance at the same time.
Technical specification
Model Feed Size (mm) Capacity (t/h) Dianater of Impeller (mm) Hydrocyclone (mm) Screen Panel (mm) Power (kw) Weight (kg) Overall Size (mm)
LZ1808-55-1224 ≤10 20-40 1800*800 250*2 1200*2400 29.4 4800 5800*5000*1950
LZ2612-65-1530 ≤10 30-60 2600*1200 300*2 1500*3000 40 5390 5800*5560*2750
LZ3016-65-1842 ≤10 40-80 3000*1600 300*2 1800*4200 46.5 10500 7950*6200*3700
LZ3016-75-1842J ≤10 60-100 3000*1600 350*2 1800*4200 57.5 11200 7950*6200*3700
LZ3620-120-2442J ≤10 100-150 3600*2000 300*4 2400*4200 89.5 15150 8500*6800*3700
LZ3624-140-3048J ≤10 120-200 3600*2400 350*4 3000*4800 115 16990 7950*7400*4100
LZ3624-140-3060J ≤10 120-200 3600*2400 350*4 3000*6000 122 18620 7950*7400*4100
LZ4230-180-3660J ≤10 160-250 4200*3000 300*6 3600*6000 149 24600 8580*8020*4860

CONTACT

Message