banner
High Pressure Suspension Mill
High Pressure Suspension Mill

High pressure suspension mill is widely used for crushing iron ore, pulverized stone, blast furnace slag, limestone, calcite, pottery and quartz in mining, metallurgy, chemical industry and building.

 

Introduction

High pressure suspension mill is widely used to crush all kinds of minerals in mining, metallurgy, chemical industry and building, such as iron ore, pulverized stone, blast furnace slag, limestone, calcite, pottery and quartz, whose hardness is under 9.3grade and moisture content under 6%. The final product’s fineness is adjustable from 80 to 425 meshes. By adding special devices, high pressure suspension mill can produce powder whose fineness can be up to 30meshes to 80 meshes.

Working principle

In the main frame of high pressure suspension mill, there is a high pressure spring about 1000-1500kg around the roller hanger. When working, the roller is rotating around the main shaft and rolling against the ring closely, with the force of high pressure spring and centrifugal force, whose rolling force is 2 times higher than R mill, so the capacity has improved a lot. After the materials are sent into the grinding room, the shovel is scooping them and putting them to the room between the roller and the ring, and the grinded powder is brought to powder separator by circulating air from the blower, with the qualified powder brought to the powder concentrator as final products and coarse ones to the grinding room. Circulation air repeats the above process, and the extra air is purified by bag filter and then discharged. When the roller and the ring are wore, adjusting the length of high pressure to keep the stable grinding pressure so as to ensure the capacity and fineness.

Salient features
  • 1. Its capacity is 10%-20% higher than the other mills under the same force, and its grinding force has improved by 800-1200kg.
  • 2. The product size is wide; the coarse ones can be 30 meshes, the average ones 425 meshes, and the fine ones 1000 meshes.
  • 3. Dust removal completely meets the national dust discharge standard.
  • 4. The powder separator is easily adjustable, and the grinding room is multiply sealed, and is in good quality.
Technical specification
Model YGM75 YGM85 YGM95 YGM100 YGM130 YGM160
Roller piece 3 3 4 4 5 6
Roller diameter(R×H) 210×150 270×140 310×170 310×170 410×210 440×270
Ring diameter(R×H) 650×150 830×140 950×170 1000×170 1280×210 1600×270
 Max.feeding size(mm) <15 <20 <25 <25 <30 <35
Fineness of product(mm) 0.613-0.033 0.613-0.033 0.613-0.033 0.613-0.033 0.613-0.033 0.613-0.033
Capacity(t/h) 1-3 1.2-4.6 2.1-5.6 2.5-8 3/12 5/22
Speed of main mill(r/min) 160 150 130 130 103 82
Power(kw) Main frame 18.5 22 30 37 75 132
Powderconcentrator 2.2 4 5.5 5.5 7.5 11
Air blower 15 22 30 37 75 132
Weight(t) 3.8 5.2 12.8 13.6 26.1 38
Overall dimension(mm) 4.1×3.5×5.1 5.3×4.1×5.2 7.1×5.9×7.9 7.3×7.2×8.3 8.8×7.5×9.7 12.55×5.7×8.36

CONTACT

If you have any question, please click here for live help. If you have any question, please click here for live help.